Keeping your world up and running. ®

Fluke 754 Supported Devices

The Fluke 754 Documenting Process calibrator has device specific support for these devices:

ABB                                                                 754 Firmware 1.06 & 1.16 - HART Support

  • 600T Rev 5.1, 5.2, 5.3
  • 658T Rev 5.1 No Sensor Trim

Abb (Elsag Bailey)

  • AS800 Rev 5.2

Anderson Instruments

  • ANDRSN1 Rev 5.1

Endress & Hauser

  • Cerabar S Rev 5.1
  • Cerabar M Rev 5.1, 5.5, 5.7
  • Deltabar S Rev 5.1, 5.2, 5.5, 5.7
  • TMT122 Rev 5.2 No Sensor Trim
  • TMT162 Rev 5.1 No Sensor Trim
  • TMT182 Rev 5.2 No Sensor Trim

Fuji

  • FCX-A/C Rev 5.1
  • FCX-A2/C2 Rev 5.1, 5.2
  • FRC Rev 5.1

Foxboro

  • I/A Pressure Rev 5.1, 5.2

Foxboro Eckardt

  • TI/RTT20 Rev 5.1 No Sensor Trim

Honeywell

  • ST3000 Rev 5.1, 5.2, 6.4
  • STT25H Rev 5.1 No Sensor Trim, 5.2 No Sensor Trim
  • STT25T Rev 5.1 No Sensor Trim

Invensys

  • I/A Pressure Rev 5.1

Micro Motion

  • MVD 2000 Rev 5.2 No Sensor Trim, 5.3 No Sensor Trim
  • MVD 2000IS Rev 5.2 No Sensor Trim, 5.3 No Sensor Trim
  • 9701 Rev 5.1 No Sensor Trim
  • 9712 Rev 5.2 No Sensor Trim
  • 9739 Rev 5.1 No Sensor Trim, 5.2 No Sensor Trim, 5.3 No Sensor Trim, 5.4 No Sensor Trim

Prime Measurement

  • 344 Rev 5.1 No Sensor Trim, 5.2 No Sensor Trim

Rosemount

  • 1151 Rev 5.4, 5.5, 5.6
  • 2051 Rev 5.9, 7.10
  • 2088 Smart Rev 5.3
  • 3001C HTG Rev 5.2
  • 3044C Temp Rev 5.1, 5.2
  • 3051C Rev 4.1, 5.2, 5.3, 5.6, 5.7, 5.9, 7.10
  • 3051C LP Rev 5.1
  • 3051S Diag Rev 5.3, 7.4
  • 3144 Temp Rev 5.1, 5.2,5.3, 5.4, 5.5, 7.6
  • 3244 Temp Rev 5.1, 5.2
  • 644 Temp Rev 5.3, 5.4, 5.5, 5.6, 5.7, 5.8
  • 2088 – Rev 5.9 and 7.10
  • 2090 – Rev 5.9 and 7.10
  • 4600 – Rev 5.1

Siemens

  • Sitrans P DS Rev 5.1
  • Sitrans P ES Rev 5.1

Smar

  • TT301 Rev 5.2 No Sensor Trim
  • LD301 Rev 5.3

Viatran

  • I/A Pressure Rev 5.1

Yokogawa

  • EJA Rev 5.1, 5.2
  • YTA Rev 5.1, 5.2

Wika

  • UniTrans Rev 5.5 No Sensor Trim, 5.6 No Sensor Trim, 6.6 No Sensor Trim
  • T32 Rev 5.1 No Sensor, 5.2 No Sensor Trim
Have more questions? Submit a request

Comments

Article is closed for comments.